Websmart+SNMP 6X2 Optic Switch (STE-326-X3XM)

Product Description

The STE-326-X3XM is a 10/100mbps fiber to ethernet switch that comes with websmart & SNMP management features. Providing 2 10/100mbps fiber SFP port, together with 6 10/100bps copper port, the 6 X 2 optic switch offers you great flexibility of fiber type, and it gives ethernet RJ45 connections while it helps you extend your network (up to 120Km).

The STE-326-X3XM current version is with 2 10/100mbps SFP slots, which it can be customized to 2 port 1X9 optic modules. The fiber ports of the STE-326-X3XM can be used for uplinking, which is mainly applied in Fiber to the office and Fiber to the Home solutions. With Websmart management features, the 6X2 optic switch can help you to manage the bandwidth, VLAN, QOS settings.

The STE-326-X3XM supports web & snmp management that enables easy access and manage the switch.
Support Telnet, Users can manage the switch remotely. When the network load is too heavy, users can adjust the network flow by IEEE 802.3X packages.

>>> Offering IEEE 802.1P priority, the STE-326-X3XM provides 3 modes of priority.
First-in-first Service: The switch will transmit earlier received data package first.
All-High-Before-Low: The switch will transmit high priority data package first.
Weight-Round-Robin: The switch will transmit data package according to the queue weight, transmit high priority data package and low priority data alternately. The data package that are for low priority will not be delay or rejected in this way.

>>> Providing Class of Service ( COS ):
>>> VLAN Multi to One
This function regards ports as target VLAN, other ports can add into this target VLAN port as a VLAN group.
But after this function is active, the original setup of the VLAN group may be replaced or cleared.

>>> Broadcast Storm Control
Broadcast Storm Max Value refers to the Broadcast Storm Limited Value, for example, if Broadcast storm packets received at 100Mbps in 10ms reach 127 (or the pre-set Max Value), switch will detect that Broadcast Storm is happening. And it will start the Broadcast Storm Control function and give up the unnecessary broadcast storm packets.

>>> Port Bandwidth Control:
Port bandwidth control enables you to control the transmission rate of each port, including upstream and downstream, and stop the user of a certain port from using too much bandwidth. And user of other ports will have more stable bandwidth. This function can be used in net cafe or broadband connection to smart residential area.

>>> Trunk:
Trunk is usually called port aggregation, mainly used for hot backup, fault tolerant in uplink pipeline between switches. Each port can be set to have 2 or 4 ports, port set to trunk group can be used only in trunk group, no matter whether the port is being used in the trunk group or not.

>>> STE-326-X3XM Main Features:
> 2 Port 100Base-FX + 6 Port 10/100Base-TxHalf/Full duplex switch ports
> 2048 MAC address table (4-way hashing)
> Two queues for QOS (1: 2 or 1: 4 or 1: 8 or 1: 16)
> Port-based, 802.1p and IP TOS priority
> Store & forward architecture and performs forwarding and filtering at non-blocking full wire speed
> An aging function and 802.3x flow control for full duplex and a backpressure function for half duplex
> Packet lengths up to 1522 bytes
> Congestion Flow Control (HOL)
> IEEE 802.1Q Port-based VLAN and adjustable VLAN to support up to 32 VLAN groups
> Broadcast storm filter
> Port Mirroring
> Remote Management by Telnet
> Web management
> SNMP management
> Configure Half/full duplex, auto-negotiation and data-communication via web interface.

More Product Features